MKRS Counters Signur waste water, portable

The MKRS Portable microcomputer flowmeter is designed for a high-precision means of measuring the speed of movement and water flow mainly in open and non-pressurized streams. MKRS is a hydrometric turntable of a new generation.

The portable hydrometric turntable of the MKRS allows you to organize operational control (audit) of water consumption in water supply and sanitation systems of agricultural and industrial enterprises, housing and communal services, effective environmental monitoring of wastewater discharges into water bodies, checking stationary measuring instruments during their installation during the organization of water accounting and their periodic monitoring. MKRS can be used on the hydrometric network of Hydromet, in hydrogeological surveys, in design organizations, in laboratory studies, and so on.

The MKRS flowmeter is used for measurements at the following facilities: canals, rivers, trays, gravity pipes and discharge collectors, laboratories and other watercourses, as well as pressure pipelines of large and medium diameters (using auxiliary equipment for tapping into the pipeline).

The main functions of the MKRS turntable:

• measurement of the time-averaged velocity of water movement at a point with an error not exceeding the one set before the measurement. The value of the permissible measurement error is entered into the device; measurement of water flow in a stream with an arbitrary cross-section by the single-point method "speed-area" according to MI13-92. Before the measurement, the coordinates of the live section and the roughness of the channel in different sections of the profile are entered into the memory of the ICRS. The coordinates of the sensor installation point (B, Hc) for measuring the average flow rate are displayed on the LCD. The error in measuring the flow rate when meeting the requirements of MI 13-92 is no more than 3%. The flow movement can be uniform, uneven and unsteady;
• measurement of water flow in a flow with a circular cross section (non-pressure pipelines) by the single-point method "speed-area" according to MI2220-96. The inner diameter of the collector pipe and the filling level on the axis of the collector pipe are recorded in the device's memory immediately before the measurement. The distance from the bottom to the sensor installation point (Hc) is displayed on the LCD. The flow measurement error is less than 4%. The flow movement can be uniform, uneven and unsteady;
• measurement of water flow by traditional basic and detailed methods "speed-area". With the help of the ICRS, longitudinal velocities are measured at several points on high-speed verticals. The flow rate is then calculated according to MI1759.

Additional functions of the ICRS:

• calculation of the area of an arbitrary cross-section of the flow;
• calculation of the area of the circular cross-section of the flow when measured in a collector pipe.

DOCUMENTATION

• MKRS Passport
• Flowmeters-speed meters microcomputer MKRS. Description of the type of measuring instrument.

Online Selection